Remove/install the seat cover and upholstery on the rear seat backrest

AR91.12-P-8457FF

6.3.04

MODELS 454.0

Remove/install the seat cover and upholstery on the rear seat backrest

P91.18-2162-09

Shown on the right rear seat backrest with code (S33) rear bench seat foldable in two sections (3-person seat)

1 Nut (with code (S33) rear bench seat foldable in two sections (3-person seat))

2 Belt end fitting (with code (S33) rear bench seat foldable in two sections (3-person seat))

3 Rear bench seat

7 Seat belt (with code (S33) rear bench seat foldable in two sections
(3-person seat))

8 Clamp

9 Retaining strap

10 Backrest frame

11 Foam rubber

12 Upholstery

4 Cover (with code (S33) rear bench seat foldable in two sections
(3-person seat))

5 Rear seat backrest

6 Belt blocker (with code (S33) rear bench seat foldable in two sections (3-person seat))

 	Remove/Install
1.1	Remove armrest from rear-seat backrest.	Only on vehicles with code (S25) rear center armrest (FFO) and when removing the right rear seat backrest.	AR91.12-P-1745FF
2.1	Unscrew the nut (1) and remove the belt end fitting (2) from the rear bench seat (3)	Only when removing the right rear seat backrest and with code (S33) rear bench seat foldable in two sections (3-person seat))
		 Observe the installation position of the belt end fitting (2) on the rear bench seat (3).
			*BA91.40-P-1007-01J
3.1	Detach cover (4) from the rear seat backrest (5)	Only when removing the right rear seat backrest and with code (S33) rear bench seat foldable in two sections (3-person seat))
		 Installation: Insert the cover (4) underneath the belt blocker (6). Ensure that the cover (4) is seated correctly. The seat belt (7) can only be pulled out of the automatic belt retractor when the rear seat backrest (5) is in a vertical position.
4	Remove headrest guides from rear seat backrest		AR91.16-P-1775FF
5	Remove clips (8) and loosen the retaining straps (9) from the backrest frame (10)	 Installation: Install new clips (8). The retaining straps (9) must be correctly tensioned when attaching the clips (8).
6	Press the foam section (11) in the lower area out of the backrest frame (10) (arrows)
7	Detach the cover (12) with foam section (11) from the backrest frame (10) and pull it upward
8.1	Remove the cover from the foam section	Only when installing a new cover (12) or foam section (11).
		Right rear seat backrest	AR91.18-P-1820-03FI
		Left rear seat backrest	AR91.18-P-1820-03FJ
9	Install in the reverse order

 Seat belts/emergency tensioning retractors

Number	Designation		Model 454.0


BA91.40-P-1007-01J	Bolt for belt end fitting to bench seat	Nm	45

Odkazované dokumenty