P91.10-0007-09
1 Rear seat cushion
2 Release lever
3 Bolts at the lower rear backrest frame
4 Backrest
5 Insulation mat
| Remove | ||
1 | Press both release levers (2) and lift rear seat cushion (1) | ||
2 | Remove rear seat cushion (1) | ||
3 | Unscrew the screws (3) on the lower left and right and center of the side of the rear backrest frame | ||
4 | Lift rear backrest (4) upwards and remove | ||
| Install | ||
5 | Insert damping mat and expose sheet metal lugs for rear seat cushion (1) | ||
6 | Insert rear backrest | Insert plug-in brackets (arrows) at the top of the rear wall; expose rear seat belts. | |
7 | Unscrew the screws (3) on the lower left and right and center of the side of the rear backrest frame | ||
8 | Insert rear seat cushion | Expose lap belt and seat belt lock. Insert rear seat cushion (1) at the back in the two sheet metal lugs and lock in position at the front. |