ar9112p1650ak

Remove/install right rear seat backrest

Typ ar · téma 91.12 · verze 0104 · 2010-01-20

Platí pro: MODEL 169.0, 245.2 except CODE (U57) Maxi Vario Package MODEL 169.3

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 91 Sedadla, lůžka, zádržný systém › 91.12 Zadní sedadla — Řada 169 (modely 0**, 3**) · Řada 245 (modely 2**)

EinPAS 37 Vnitřní výbava › 37.27 Sedadlo vzadu › 37.27.42 Opěradlo sedadla/opěrka hlavy — Řada 169 (modely 0**, 3**) · Řada 245 (modely 2**)

AR91.12-P-1650AK

Remove/install right rear seat backrest

15.12.09

MODEL 169.0, 245.2 except CODE (U57) Maxi Vario Package

MODEL 169.3

Remove/install right rear seat backrest

P91.12-2770-09

Illustrated on model 169.0

1 Right rear seat backrest

2 Expansion clip

3 Trim

4 Bolt

8 Bolt

9 Lock

10 Right hinge fixture

5 Bolt

6 Belt end fitting

7 Electrical connector

Remove/install

1.1

Move load compartment floor to lower level

Model 169.0 and model 245.2,

Model 169.3 with code (U56) Easy Vario System

2.1

Take out luggage compartment cover

For model 245 or

Model 169 with code (723) Luggage compartment cover

3

Release left rear seat backrest and right rear seat backrest (1) and fold forwards

4

Remove expansion clip (2).

Installation: Replace damaged expansion clips (2).

5

Remove paneling (3)

Installation: Note correct seating of panel (3) in outer area.

6

Unscrew bolt (4)

*BA91.12-P-1003-03E

7

Fold left rear seat backrest and right rear seat backrest (1) back again

Do not lock right rear seat backrest (1).

8

Unscrew bolt (5) and remove belt end fitting (6)

*BA91.40-P-1001-01K

9

Detach electrical connector (7) and place electrical wiring harness aside

10

Remove bolts (8)

*BA91.12-P-1004-03E

11

Release left rear seat backrest and right rear seat backrest (1) again and fold forwards

12

Use screwdriver to press in lock (9) for right hinge fixture (10) and release (arrow)

Installation: Make sure that lock (9) latches correctly into place.

13

Lift right rear seat backrest (1) out of right hinge fixture (10)

Aid of helper required.

Installation: Check correct seating of right rear seat backrest (1) in right hinge fixture (10).

14

Remove right rear seat backrest (1) out of vehicle

Remove right rear seat backrest (1) carefully out of vehicle, as otherwise vehicle trim parts may be damaged.

Aid of helper required.

15

Install in the reverse order

Rear seats

Number

Designation

Model 169.0

Model 169.3

Model 245.2

BA91.12-P-1003-03E

Bolt, hinge of right rear seat backrest to hinge of left rear seat backrest

Nm

27

27

27

BA91.12-P-1004-03E

Bolt, hinge to vehicle floor

Nm

50

50

50

Seat belts/emergency tensioning retractors

Number

Designation

Model
169, 245

BA91.40-P-1001-01K

Bolt/nut on belt end fitting

Nm

32