Remove/install rear seat backrest · ar9112p1620pm · Mercedes-Benz WIS

AR91.12-P-1620PM

Remove/install rear seat backrest

30.4.09

MODEL 463.236 /248
with CODE (979) Special protection version
with CODE (ZS6) Special protection version FB6
individual seats in rear

MODEL 463.236 /248
with CODE (979) Special protection version
with CODE (ZS7) Special protection version FB7
individual seats in rear

1 Seat trim panel

8 Rear seat backrest

9 Pneumatic line

10 Control valve

P91.10-2264-03

P91.12-2658-01

4 Connector block

3 Seat trim panel

P91.10-2263-01

P91.10-2228-01

5 Electrical line

6 Cable tie

7 Rear seat backrest bolt

 	Remove/install
1	Remove rear seat		AR91.12-P-1000SA
2	Remove seat lining (1, 3)	 Push seat lining (1, 3) backwards out of the catch lug.
3	Detach connector of electrical line (5) on right rear individual seat control unit (N25/10) or left rear individual seat control unit (N25/9)
4	Remove connector block (4)
5	Detach electrical connectors on connector block (4)	 Mark the electrical connectors before detaching them.
		 Installation: Observe marking of electrical connectors.
6	Remove control valve (10) for multicontour seat		AR91.25-P-1710GN
7	Unclip connections on pneumatic lines (9) from bracket
8	Expose electric lead (5) and pneumatic line (9)	 Installation: replace cable ties (6).
9	Remove bolts on rear seat backrest (7) on right and left		*BA91.12-P-1002-03J
		Torx bit set	*000589011000
10	Remove rear seat backrest (8)
11	Install in the reverse order
12	Normalizing the seats		AR91.29-P-3005-01G

 Rear seats

Number	Designation		Model 463


BA91.12-P-1002-03J	Screw for backrest on backrest fitting	Nm	35

Torx bit set

000 589 01 10 00