AR91.12-P-1620M | Remove/install rear-seat backrest | 2.2.98 |
MODEL 220.0 /1 with CODE (223b) Electrically adjustable rear bench seat
P91.12-2027-11
1 Rear seat cushion
2 Rear seat backrest
P91.12-2528-09
3 Bolt
4 Control valve cover
7 Bolts
8 Bolts
5 Backrest side paneling
6 Upholstery on center armrest
| Remove/Install | ||
1 | Remove rear seat cushion (1). | ||
2 | Remove lumbar support control valve for rear seat backrest | ||
3 | Unscrew screw (3) and remove cover of control valve (4) | ||
4 | Remove rear door sill molding | ||
5 | Remove rubber door seals | In the area of the backrest side paneling (5). | |
6 | Remove backrest side paneling (5) | Ensure that retaining clamps (arrows) are seated correctly. | |
7 | Unlock upholstery above center armrest (6) and pull out upwards | Unlocking, accessible from above on the left and right. | |
8 | Unscrew bolts (7) from seat adjuster | Bolt for rear seat backrest to seat adjuster | |
9.1 | Disconnect electrical connector for heated seats | With electric heated seats for left and right rear seat, code 872. | |
9.2 | Disconnect electrical connector of seat ventilation and heated seats | With seat ventilation for rear seats, code 402a. | |
10 | Expose pneumatic line from control valve to rear seat backrest | ||
11 | Unscrew bolts (8) and lift up rear seat backrest (2) and remove | Bolt, rear seat backrest to rear wall. Installation: Check belts and seat belt buckle for clearance. | |
12 | Install in the reverse order |
Rear seat backrest