Remove/install front seats

AR91.10-P-1000RR

Remove/install front seats

19.2.03

 

Remove/Install

1.1

Disconnect ground cable of battery

Only on vehicles with code (I13) side airbag (FFO).

AR54.10-P-0003RR

2

Unscrew screw (1) at belt end fitting



*BA91.40-P-1001-01G

3

Remove seat belt out of belt guide

4

Push seat into the foremost position and unscrew rear bolts (2) of seat rails at the bearing bracket



*BA91.10-P-1007-01G

5

Push seat into the rearmost position and unscrew front bolts (3) of the seat rails

 Installation: First screw in the bolts (2).



*BA91.10-P-1006-01G

6.1

Lift up seat and unclip wiring harness from the clip on the seat console

Only on vehicles with code (I13) side airbag (FFO), (S17) heated seats (FFO) or belt lock recognition.

7.1

Detach connector with clip and separate connector

Only on vehicles with code (I13) side airbag (FFO), (S17) heated seats (FFO) or belt lock recognition.

 Compress locking device and disconnect plug.

8

Remove seat

 Installation: Do not trap electrical lines between the floor and seat rail

9

Install in the reverse order

Number

Designation

Model 452.3/4

BA91.40-P-1001-01G

Screw on belt end fitting

Nm

30

Number

Designation

Model 452.3/4

BA91.10-P-1006-01G

Bolt, seat adjuster to front floor panel

Nm

30

BA91.10-P-1007-01G

Bolt, seat adjuster to rear floor panel

Nm

30