P91.10-2219-09
Shown on model 203 up to 31.5.04
1 Front seat
2 Covering
3 Bolt on belt end fitting
5 Screws for front seat rail
4 Screws for rear seat rail
X55/3 Driver seat connector block
X55/4 Front passenger seat connector block
N32/1 Driver front seat adjustment control unit with memory
N32/2 Front passenger front seat adjustment control unit with memory
| Remove/install | ||
1 | Move head restraint down | ||
2 | Move steering wheel in | Only driver side. | |
3 | Adjust front seat (1) to front | ||
4 | Unclip cover (2) from belt end fitting | Except model 203.7 | |
5 | Unscrew bolts from belt end fitting (3). | Except model 203.7 | |
Screw on belt end fitting | |||
6 | Disconnect connector | Except model 203.7 | |
7 | Unscrew bolts for rear seat rails (4) | Screw at seat rail | |
8 | Position front seat (1) to rear | ||
9 | Unscrew bolts for front seat rails (5) | Screw at seat rail | |
10 | Disconnect control unit connectors | Driver side front seat adjustment control unit with memory (N32/1), passenger seat adjustment control unit with memory (N32/2). | |
11 | Unplug connectors from connector block | At driver seat connector block (X55/3), passenger seat connector block (X55/4). | |
12 | Remove pneumatic connection | For vehicles with code 404 Left multicontour seat. | |
13 | Remove front seat (1) | Installation: Ensure the locking bolts are seated correctly. | |
14 | Install in the reverse order | ||
15 | Carry out function check |
Front seats
Seat belts/emergency tensioning retractors