P88.80-2056-09
1 Hinge hole cover
2 Expanding clip
5 Side cover
6 Expanding clip
3 Center cover
4 Rear-end door sealing frame
| Remove/Install | ||
1 | Open rear-end door | See Operating Instructions | |
2 | Remove expanding clips (2) | Installation: Replace expanding clips (2) | |
3 | Remove left or right hinge hole cover (1) toward outside between vehicle roof and rear spoiler | ||
4 | Detach center cover (3) from roof frame with mounting wedge and remove | The center cover (3) must not be removed for removing the rear-end door sealing frame (4) | |
| |||
Installation: Replace center cover (3) Clean assembly point on roof frame and degrease. | |||
5 | Remove rear-end door sealing frame (4) from D-pillar in area of side cover (5) | Installation: Do not use lubricant and ensure that rear-end door sealing frame (4) is seated correctly to prevent leakage | |
6 | Remove expanding clips (6) | Installation: Replace expanding clips (6) | |
7 | Remove side cover (5) | ||
8 | Install in the reverse order |
Mounting wedge
110 589 03 59 00