P88.40-2174-06
Shown on Model 203.0
1 Engine hood catch
2 Bolts
3 Radiator crossmember
4 Engine hood cable
5 Screw
6 Safety hook
P88.40-2729-01
Shown on model 203.7## #E with code (809) model year 2009
1 Engine hood catch
7 Cover
| Removing | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Open engine hood | ||
2 | Unscrew bolts (5) and remove retaining hook (6) | Retaining hook (6) can be removed and replaced separately. | |
3 | Unscrew bolts (2) from engine hood catch (1) | ||
4 | Remove cover (7) from engine hood catch (1) | ||
5 | Disconnect electrical connector from right engine hood catch (1). | In vehicles up to 23.04.04 | |
6 | Disconnect electrical connector from left engine hood catch (1). | In vehicles as of 24.04.04 | |
7 | Remove engine hood catch (1) from radiator crossmember (3), unhook engine hood cable (4) and remove engine hood catch (1) | ||
| Install | ||
8 | Insert engine hood catch (1) into radiator crossmember (3) and hook engine hood cable (4) into engine hood catch (1) | ||
9 | Connect electrical connector to right engine hood catch (1) | In vehicles up to 23.04.04 | |
10 | Connect electrical connector to left engine hood catch (1) | In vehicles as of 24.04.04 | |
11 | Install cover (7) on engine hood catch (1) | ||
12 | Clip engine hood cable (4) into radiator crossmember (3) | ||
13 | Tighten bolts (2) | | |
14 | Insert retaining hooks (6) into engine hood and tighten bolts (5) | | |
15 | Close engine hood | Check whether engine hood catches (1) lock correctly. For this purpose pull closed engine hood upward with a jerk. | |
16 | Check adjustment of engine hood, correct if necessary |
Engine hood
Odkazované dokumenty
- ar8840p3020p
- as0000z001101a Nebezpečí poranění prstů přivřením nebo pohmožděním při demontáži, montáži a seřizování kapoty, dveří, krytů a posuvného střešního okna