ar8840p1000tx

Open engine hood, move to upright position and close

Typ ar · téma 88.40 · verze 0100 · 2004-09-13

Platí pro: MODEL 219.3

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 88 Nástavbové díly, vnější víka › 88.40 Kapota motoru, čelní víko — Řada 219 (modely 3**)

EinPAS 35 Karoserie/rám/montované díly › 35.36 Kapota/víko/uzávěr › 35.36.30 Kapota motoru — Řada 219 (modely 3**)

AR88.40-P-1000TX

Open engine hood, move to upright position and close

25.5.04

MODEL 219.3

Open engine hood, move to upright position and close

P88.40-2542-06

1 Lever

2 Safety hook

3 Locking lever

4 Left hood hinge

5 Right hood hinge

Open

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Pull release lever (1) in driver's footwell to release engine hood

2

Lift safety hook (2) and move engine hood to normal position

Move to upright position

3

Actuate lock lever (3) on left hood hinge (4) and slightly press engine hood upward

Press engine hood only upward until lock lever (3) no longer arrests

4

Actuate lock lever (3) on hood hinge (5) and position engine hood vertically

Lock lever (3) on left hood hinge (4) secures the engine hood in the vertical position.

Close

5

Slightly lift engine hood, actuate lock lever (3) on left hood hinge (4) and close engine hood

Allow engine hood to fall from a height of approx. 20 cm.

6

Check whether engine hood is locked properly

Pull engine hood upward with a jerk.

Odkazované dokumenty