ar8840p1000f

Opening engine hood, moving to upright position, closing

Typ ar · téma 88.40 · verze 0104 · 1999-02-15

Platí pro: MODEL 210, 208.3 /4

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 88 Nástavbové díly, vnější víka › 88.40 Kapota motoru, čelní víko — Řada 208 (modely 3**, 4**) · Řada 210

EinPAS 35 Karoserie/rám/montované díly › 35.36 Kapota/víko/uzávěr › 35.36.30 Kapota motoru — Řada 208 (modely 3**, 4**) · Řada 210

AR88.40-P-1000F

Opening engine hood, moving to upright position, closing

15.12.94

MODEL 210, 208.3 /4

Opening engine hood, moving to upright position, closing

P88.40-0235-06

Illustrated on model 210

1 Lever

2 Handle

3 Locking lever

4 Edges (engine hood)

Opening

Danger!

Risk of injury from fingers being pinched or jammed when removing and installing and aligning hoods, doors, trunk lids/tailgates and sliding roof

When moving components ensure that no body parts or limbs are in the area of motion.

AS00.00-Z-0011-01A

1

Pull lever (1) on left below instrument panel to release engine hood

Handle (2) comes out of radiator cowl, lift engine hood slightly.

2

Pull handle (2) out of grille until it reaches the stop and open engine hood

Do not lift with handle.
Ensure that windshield wiper arm is not folded toward front.

Moving to upright position

3

Pull engine hood in closing direction, press locking lever (3) on right engine hood hinge in direction of arrow and move engine hood to upright position.

A locking lever (3) is located only on the right engine hood hinge.

Closing

4

Press locking lever (3) on right engine hood hinge in direction of arrow and close engine hood until locking lever (3) engages.

5

Close engine hood.

Position hands on edges (4) only. Check locking function after closing engine hood, for this purpose pull engine hood upward with jerk.

Odkazované dokumenty