ar8840d3000na

Removing and installing engine hood

Typ ar · téma 88.40 · verze 0107 · 2003-09-17

Platí pro: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODELS 690.6

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 88 Nástavbové díly, vnější víka › 88.40 Kapota motoru, čelní víko — Řada 690 (modely 6**) · Řada 901 (modely 6**) · Řada 902 (modely 6**) · Řada 903 (modely 6**) · Řada 904 (modely 6**) · Řada 905 (modely 6**)

EinPAS 35 Karoserie/rám/montované díly › 35.36 Kapota/víko/uzávěr › 35.36.30 Kapota motoru — Řada 690 (modely 6**) · Řada 901 (modely 6**) · Řada 902 (modely 6**) · Řada 903 (modely 6**) · Řada 904 (modely 6**) · Řada 905 (modely 6**)

AR88.40-D-3000NA

Removing and installing engine hood

16.1.01

MODEL 901.6, 902.6, 903.6, 904.6, 905.6

MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODELS 690.6

Removing and installing engine hood

D88.40-1101-06

1 Engine hood

2 Hood support

3 Fuse

4 Spring

5 Hinge

6 Collar nuts

Removal:

1

Remove retainer (3) and hood support (2) with spring (4) from guide on engine hood (1).

Support engine hood (1) to prevent damage. Pay attention to installation position of spring (4).

2

Unscrew collar nuts (6) from hinge (5) and remove engine hood (1)

Installation

3

Position engine hood (1) on hinges (5).

Only fit collar nuts (6), do not tighten

4

Install spring (4), insert hood support (2) into guide on engine hood (1) and mount new retainer (3).

5

Adjust engine hood

AR88.40-D-3020A

*BA88.40-N-1001-01A

6

Grease hinges (5).

Engine hood

Number

Designation

Models
690.6, 901, 902, 903, 904, 905

Models
WD1/WD2/
WD3/WD6/
WD7/XD1/
XD2/XD3/
XD4/XD5/
XD6/XD7/
YD1/YD2/
YD3/YD4/
YD5/YD6/
YD7

BA88.40-N-1001-01A

Collar nut for engine hood on hinge

Nm

23

23

Odkazované dokumenty