P88.30-2419-07
1 Screw
2 Screw
5 Screw
6 Right hinge
3 Left hinge
4 Rear-end door top
P88.30-2420-06
3 Left hinge
6 Right hinge
7 Rear spoiler
8 Screw
9 Rear-end door wiper arm
10 Screw
11 Screw
12 Screw
E21 Center high-mounted stop lamp
| Remove/install | ||
1 | Remove center high-mounted stop lamp (E21) | ||
2 | Remove rear-end door wiper arm (9) | ||
3 | Unscrew bolt (8) on rear spoiler (7). | ||
4 | Open rear-end door upper section (4) | ||
5 | Mark position left hinge (3) and right hinge (6) in relation to upper rear-end door (4). | ||
6 | Unscrew bolts (10) at side on rear spoiler (7). | ||
7 | Unscrew bolts (1, 2) from left hinge (3) and bolt (2) from right hinge (6). | ||
8 | Loosen bolt (5) on right hinge (6). | Do not unscrew bolt (5), otherwise the upper rear-end door (4) can be damaged by folding down. | |
Installation: Align upper rear-end door (4) according to markings made previously and tighten bolts (1, 2, 5). | |||
| |||
9 | Carefully lift upper rear-end door (4) in area of left hinge (3) and unscrew bolts (11) on rear spoiler (7). | Helper required for unscrewing inner bolt (11). | |
10 | Screw bolt (1) into left hinge (3). | Screw in bolt (1) only until upper rear-end door (4) is fastened. | |
11 | Unscrew bolt (5) from right hinge (6). | Installation: Screw in bolt (5) only until upper rear-end door (4) is fastened. | |
12 | Carefully lift upper rear-end door (4) in area of right hinge (6), unscrew bolts (12) on rear spoiler (7) and remove rear spoiler (7) with aid of helper. | Helper required for unscrewing inner bolt (12). | |
13 | Install in the reverse order |
Rear-end door