W88.20-1034-09
Shown on model 950.6 |
1 | Screw | 6 | Screw | 11 | Bumper corner section | ||
2 | Electrical connector | 7 | Cover | E8 | Left lamp unit | ||
3 | Cover | 8 | Screw | E9 | Right lamp unit | ||
4 | Cap | 9 | Screw | E18 | Left front turn signal lamp | ||
5 | Cap | 10 | Screw | E19 | Right front turn signal lamp |
| Remove/install | ||
1 | Remove left front turn signal lamp (E18) and right front turn signal lamp (E19) | ||
2 | Unscrew bolt (1) from left lamp unit (E8) and right lamp unit (E9) | ||
3 | Pivot left lamp unit (E8) and right lamp unit (E9) toward outside | ||
4 | Disconnect electrical connector (2) from left lamp unit (E8) and right lamp unit (E9) | ||
5 | Remove cover (3) | ||
6 | Open caps (4, 5) | ||
7 | Remove screw/bolts (6) | Bolt, bumper to underbody | |
8 | Remove covers (7) | ||
9 | Unscrew bolt (8) | Each on right and left bracket of front bumper on substructure. | |
Bolt, bumper to underbody | |||
10 | Remove screw/bolts (9) | On right and left bumper corner section (11). | |
Bolt, bumper to underbody | |||
11 | Remove screw/bolt (10) | On right and left bumper corner section (11). | |
Bolt, bumper to underbody | |||
12 | Remove front bumper | The right and left bumper corner section as well as the other components of the front bumper (11) remain bolted together. | |
13 | Install in the reverse order | ||
| Check | ||
14 | Check adjustment for left lamp unit (E8) and right lamp unit (E9), correct if necessary | ||
|
Odkazované dokumenty
- ap8210w8260a Zkontrolovat, seřídit nastavení světlometů
- ar8210w4725b Demontáž, montáž ukazatele směru