P88.20-2044-06
1 Bumper
2 Bumper carrier
3 Aligning wedge
6 Bolt
7 Bracket
8 Guide
9 Edge at rear fender
10 Edge at bumper
P88.20-2045-09
1 Bumper
3 Aligning wedge
3a Aligning pin
4 Trim panel
14 Nut
X35/28 Plug connection of parktronic system (PTS), rear bumper
5 Nut
11 Bolts
12 Bolt
13 Locking hook
| Removing | ||
1 | Remove luggage compartment trim panels | Rear wall trim panel can remain in vehicle. | |
2 | Separate plug connection of parktronic system (X35/28) | ||
3 | Take out screws (12) | ||
4 | Unscrew nuts (14) | ||
5 | Unscrew screws (11) | ||
6 | Remove cover (4) and unscrew nuts (5) | Ensure that the inner nuts do not drop into the cavity in the rear center assembly when they are taken off. | |
N | Take off bumper (1) complete with bumper carrier (2) | Pull the side ends at the bumper down slightly for this step and run out the hooks (13) to the outside. Have a second person assist you. | |
8 | Unscrew bolts (6) and take bumper carrier (2) off the bumper (1) | ||
| Installing | ||
9 | Insert bumper carrier (2) into bumper (1) and screw in bolts (6) | Fit on existing M-AMG bumper. | |
Retrofit M-AMG trim parts | |||
10 | Fit aligning wedges (3) onto stud bolts at bumper carrier (2) | ||
11 | Install bumper (1) complete with bumpe carrier (2) and aligning wedges (3) | When inserting, ensure that the bracket (7) on the left and right are pushed into the guides (8). | |
12 | Screw on nuts (5) | Ensure that the inner nuts do not drop into the cavity in the rear center assembly when inserting. Tighten the nuts (5) only sufficiently to still be able to alter the position of the aligning wedges (3). | |
13 | Alter position of bumper (1) in longitudinal direction | Alter position of aligning wedges (3) with aligning pin (3a) until the edge at the bumper (10) is aligned with the edge at the rear fender (9). | |
14 | Tighten nuts (5) and install covers (4) | | |
15 | Screw in bolts (11) | ||
16 | Screw on nuts (14) | ||
17 | Screw in bolts (12) | Ensure the hooks (13) are correctly located at the inner edge at the rear fender. | |
18 | Fit together plug connection of parktronic system (X35/28) | ||
19 | Install luggage compartment trim panels |
Bumper