Remove/install rear bumper

AR88.20-P-2200GL

Remove/install rear bumper

15.02.2019

Model

461.302/304/305/331/332/333/334/340/342/344

1

Bumper corner

2

Bolts

3

Bolts

E3/1

Rear fog lamp

E4/2

Stealth stop lamp

E7

Backup lamp

3

Bolts

4

Bolts

E4/2

Stealth stop lamp

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

 

Remove/install

1

Disconnect ground line from battery.

AR54.10-P-0003GL

2

Raise vehicle.

AR00.60-P-1000G

3

Remove screw/bolts (2) .

4

Remove left and right bumper corners (1).

 Installation: Ensure that the spacer sleeves between the fenders and bumper corners (1) are seated correctly.

5

Remove rear fog light (E3/1).

Model 461.302/304/305/331/332/333/334/340/342/344

Model 461.305/333/340

AR82.10-P-5103GX

6

Remove reversing light (E7).

Model 461.302/304/305/331/332/333/334/340/342/344

Model 461.305/333/340

AR82.10-P-5170GX

7

Remove stealth brake lamp (E4/2).

Model 461.305/333/340
with code E10 (Blackout lighting without convoy light)

AR82.10-P-5390GX

8

Remove screws/bolts (4).

 Bolt, bracket for rear bumper to frame

*BA88.20-P-1004-01G

9

Remove left and right bumper.

10

Install in the reverse order.

11

Check lighting system for proper operation.

 Bumper

Number

Designation

Model 461.302/304/305/331/332/333/334/340/342/344

BA88.20-P-1004-01G

Bolt, bracket for rear bumper to frame

M10

Nm

39