P88.20-2748-09
1 Rear bumper
2 Bolt
3 Internal component
4 Wiring harness (with code (220) Parktronic system (PTS) or code (889) Keyless Go)
5 Electrical connector (with code (889) Keyless go)
6 Internal component
7 Guide
A43b8 Right inner sensor, rear bumper (with code (220) Parktronic system (PTS))
A43b9 Left inner sensor, rear bumper (with code (220) Parktronic system (PTS))
A43b10 Left outer sensor, rear bumper (with code (220) Parktronic system (PTS))
8 Bracket
9 Tow hook cover
10 Mounting rail
A2/31 Rear bumper antenna (with code (889) Keyless Go)
A43b7 Right outer sensor, rear bumper (with code (220) Parktronic system (PTS))
P88.20-2749-08
1 Rear bumper
6 Internal component
8 Bracket
13 Bracket
14 Rivet
11 Rivet
12 Rivet
1 Rear bumper
7 Guide
10 Mounting rail
15 Clamps
16 Rivets
17 Clip
P88.20-2750-03
| Disassemble/assemble | ||
1 | Remove rear bumper (1) | ||
2.1 | Remove sensor (A43b7, A43b8, A43b9 and A43b10) from rear bumper (1) | Only on vehicles with code (220) Parktronic system (PTS) | |
3.1 | Unclip rear bumper antenna (A2/31) and disconnect electrical connector (5) | Only on vehicles with code (889) Keyless go | |
4.1 | Expose wiring harness (4) and remove | Only on vehicles with code (220) Parktronic system (PTS) or code (889) Keyless Go | |
5 | Unscrew bolts (2) from internal | ||
6 | Unclip internal component (3) (arrows) and remove | | |
7 | Remove tow hook cover (9) | ||
8 | Drill out rivets (12) and remove left and right bracket (13) on both sides | Rechargeable battery-powered drill/screwdriver | |
Installation: Check seal for bracket (13), replace if necessary. Position new rivets (12). | |||
Hand riveter | |||
9 | Drill rivets (11) out of left and right internal component (6). | Rechargeable battery-powered drill/screwdriver | |
Installation: Position new rivets (11). | |||
Hand riveter | |||
10 | Unclip left and right internal component (6) (arrows) and remove | | |
11 | Drill rivets (14) out of left and right bracket (8) and remove left and right bracket (8) | Rechargeable battery-powered drill/screwdriver | |
Installation: Observe installation position of bracket (8) Position new rivets (14). | |||
Hand riveter | |||
12 | Remove clip (17) from left and right mounting rail (10) | Installation: Check clip (17), replace if necessary | |
13 | Remove clips (15) from left and right guide (7) with suitable tool | Installation: Check clamps (15), replace if necessary. | |
14 | Drill rivets (16) out of left and right guide (7), remove left and right guide (7) | Rechargeable battery-powered drill/screwdriver | |
Installation: Position new rivets (16). | |||
Hand riveter | |||
15 | Remove mounting rail (10) from left and right guide (7) | ||
16 | Assemble in reverse order |
Long wedge
115 589 03 59 00
Commercially available tools
Odkazované dokumenty
- ar5465p0002tx Demontáž, montáž čidel systému Parktronic (PTS) v zadním nárazníku
- ar8820p2200tx