AR88.20-P-2050VB | Disassemble/assemble front bumper | 23.1.08 |
MODEL 171.4 as of 3.3.08
MODEL 171.4 with CODE (809) Model year 2009
P88.20-3159-06
Shown with code (220) Parktronic system (PTS)
1 Bumper paneling
3 License plate bracket
5 Retaining rail
7 PTS wiring harness (with code (220) Parktronic system (PTS))
8 Left impact damper
9 Right impact damper
10 Center impact damper
14 Radiator grille
15 Frame
17 Center air inlet grate
19 Right air inlet grate
20 Left air inlet grate
21 Towing device cover
22 License plate mounting plate
23 Fog lamp cover
E5/1 Left front fog lamp
E5/2 Right fog lamp
P88.20-3158-09
Shown with code (220) Parktronic system (PTS)
1 Bumper paneling
2 Screw
3 License plate bracket
4 Expansion clip
5 Retaining rail
6 Expansion clip (with code (220) Parktronic system (PTS))
7 PTS wiring harness (with code (220) Parktronic system (PTS))
8 Left impact damper
9 Right impact damper
10 Center impact damper
11 Lug
12 Lug
A42b3 Left inner sensor, front bumper (with code (220) Parktronic system (PTS))
A42b4 Right inner sensor, front bumper (with code (220) Parktronic system (PTS))
A42b5 Right center sensor, front bumper (with code (220) Parktronic system (PTS))
A42b6 Right outer sensor, front bumper (with code (220) Parktronic system (PTS))
E5/1 Left front fog lamp
E5/2 Right fog lamp
14 Radiator grille
15 Frame
16 Expansion clip
17 Air inlet grille
18 Support stand
19 Right air inlet grate
20 Left air inlet grate
A42b1 Left outer sensor, front bumper (with code (220) Parktronic system (PTS))
A42b2 Left center sensor, front bumper (with code (220) Parktronic system (PTS))
| Disassemble/assemble | ||
1 | Lay bumper down on suitable assembly stand (18) | ||
2 | Unscrew bolts (2) and unclip license plate bracket (3) from bumper covering (1) | ||
3 | Remove expansion clips (4) and remove left and right retaining strips (5) from bumper covering (1) | ||
4 | Manually unclip sensors (A42b1, A42b2, A42b3, A42b4, A42b5, A42b6) from bumper covering (1) | On vehicles with code (220) Parktronic system (PTS) | |
| Information on preventing damage to electronic components due to electrostatic discharge | ||
5 | Remove expansion clips (6) and remove PTS wiring harness (7) together with sensors (A42b1, A42b2, A42b3, A42b4, A42b5, A42b6) | On vehicles with code (220) Parktronic system (PTS) Assembly: Route PTS wiring harness (7) into corresponding recesses in impact dampers (8, 9, 10). | |
6 | Press lug (11) and remove left impact damper (8) | ||
7 | Press lug (12) and remove right impact damper (9) | ||
8 | Remove expansion clip (16) from left and right frame (15) | ||
9 | Unhook left and right frame (15) from radiator grille (14 (arrows) and unclip from bumper paneling (1) | | |
10 | Remove left front fog lamp (E5/1) and right front fog lamp (E5/2) from frame (15) | ||
11 | Remove center impact absorber (10) together with license plate plates (22) | Assembly: Ensure that both license plate mounting plates (22) are seated properly between center impact damper (10) and bumper covering (1). | |
12 | Unclip left and right front fog lamp cover (23) from bumper paneling (1) | | |
13 | Unclip center air inlet grate (17) from bumper covering (1)n | | |
14 | Unclip left air inlet grate (20) from bumper covering (1)n | | |
15 | Unclip right air inlet grate (19) from bumper covering (1)n | | |
16 | Remove towing device cover (21) from bumper covering (1) | ||
17 | Assemble in the reverse order |
Mounting wedge
110 589 03 59 00
Odkazované dokumenty
- ah5400p000101a Upozornění k zamezení poškozením elektronických součástí elektrostatickým výbojem