ar8820p2050tx

Disassemble/assemble front bumper

Typ ar · téma 88.20 · verze 0100 · 2004-09-13

Platí pro: MODEL 219.3

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 88 Nástavbové díly, vnější víka › 88.20 Nárazník — Řada 219 (modely 3**)

EinPAS 35 Karoserie/rám/montované díly › 35.38 Nárazník / spoiler / venkovní kryty / úložné schránky/ ochrana přídě vozu › 35.38.30 Přední nárazník — Řada 219 (modely 3**)

AR88.20-P-2050TX

Disassemble/assemble front bumper

28.6.04

MODEL 219.3

Disassemble/assemble front bumper

P88.20-2660-07

1 Front bumper

2 Tow eye cover

E5/1 Left fog lamp

E5/2 Right fog lamp

3 Screw

4 License plate covering

5 Air inlet grille

Disassemble/assemble front bumper

P88.20-2661-09

1 Front bumper

6 Left impact absorber

7 Inner part, middle

8 Center impact absorber

9 Right impact absorber

10 Wiring harness (with code (220) Parktronic system (PTS))

11 Screw

12 Expansion rivets

A42b5 Front bumper center right sensor (with code (220) Parktronic system (PTS))

A42b6 Front bumper right outer sensor (with code (220) Parktronic system (PTS))

E5/1 Left fog lamp

E5/2 Right fog lamp

X26/27 Front PTS separation point

A42b1 Front bumper left outer sensor (with code (220) Parktronic system (PTS))

A42b2 Front bumper center left sensor (with code (220) Parktronic system (PTS))

A42b3 Front bumper inner left sensor (with code (220) Parktronic system (PTS))

A42b4 Front bumper inner right sensor (with code (220) Parktronic system (PTS))

Disassemble/assemble front bumper

P88.20-2662-09

Shown on left side of front bumper

1 Front bumper

13 Terminal strip

14 Guide bolts

15 Outer inner section

16 Clamp

19 Spring (with code (600) Headlamp cleaning system)

20 Circlip

17 Cover (with code (600) Headlamp cleaning system)

18 Bracket (with code (600) Headlamp cleaning system)

Disassemble/assemble

1

Remove license plate.

2

Unscrew bolts (3) and remove license plate covering (4)

3

Unclip air inlet grate (5)

4

Remove tow eye cover (2)

5

Remove radiator paneling

AR88.40-P-4001TX

6

Remove front bumper (1).

AR88.20-P-2000TX

7.1

Remove sensor (A42b1, A42b2, A42b3, A42b4, A42b5 and A42b6) from front bumper (1)

Only with code (220) Parktronic system (PTS)

AR54.65-P-0001TX

8

Unclip inner center section (7) and remove

9.1

Remove expansion rivets (12), expose wiring harness (10) with front PTS separation point (X26/27) and remove

Only with code (220) Parktronic system (PTS)

10

Remove middle impact absorber (8), left impact absorber (6) and right impact absorber (9)

11

Unscrew bolts (11) and remove left cover with left fog lamp (E5/1) and right cover with right fog lamp (E5/2)

12

Remove left and right terminal strip (13) from guide bolts (14)

13.1

Remove spring (19), cover (17) and bracket (18)

Only with code (600) Headlamp cleaning system

14

Remove left and right outer inner section (15)

Do not remove circlip (20).Left and right outer inner sections (15) are slotted and can be pulled out below circlip (20).

Installation: Check clips (20) for proper state, replace if necessary

15

Assemble in reverse order

Odkazované dokumenty