P88.20-0312-09
Illustrated on model 168 up to 28.2.01
1 Bolts
5 Lateral guide
6 Bumper
2 Bolt
3 Bolt
4 Clips
P88.20-2475-07
Shown on model 168.035
7 Electrical connector
X26/27 Front bumper PTS connector (only with code (220a) Parktronic system (PTS))
E5/1 Left fog lamp (only on model 168.035/135)
E5/2 Right fog lamp (only on model 168.035/135)
| Remove/Install | ||
1 | Open engine hood | ||
2 | Unscrew bolts (1, 2, 3) | On model 168 as of 1.3.01 the bumper (6) is screwed with the bolts (1) to the lamp units. | |
| |||
3 | Unclip clips (4) | Installation: Check clips (4), replace if necessary. | |
4 | Unclip bumper (6) from lateral guides (5) and remove with a 2nd person | Pull bumper (6) on both sides toward front when removing (arrows), in order to avoid paint damage. Installation: Fit bumper (6) on both sides onto the lateral guides when installing (5) (arrows) and push back. | |
5.1 | Disconnect front bumper PTS connector (X26/27) | Only with code (220a) Parktronic system (PTS) Installation: Ensure correct seating of the front bumper PTS connector (X26/27). | |
6.1 | Disconnect electrical connectors (7) | Only on model 168.035/135 Installation: Ensure correct seating of the electrical connectors (7). | |
7.1 | Modify AMG bumper | Only with AMG modification | |
| Retrofit AMG trim panels | ||
8 | Install in reverse order | ||
9.1 | Inspect setting of left fog lamp (E5/1) and right fog lamp (E5/2) | Only on model 168.035/135 | |
| Set or inspect fog lights |
Bumper
Odkazované dokumenty
- ap8210p826004a Kontrola, seřízení mlhových světel
- az8800p0001e