ar8810p1400rt

Remove/install fender liner in rear fender

Typ ar · téma 88.10 · verze 0100 · 2005-05-10

Platí pro: MODEL 251

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 88 Nástavbové díly, vnější víka › 88.10 Blatník — Řada 251

EinPAS 35 Karoserie/rám/montované díly › 35.37 Blatník › 35.37.40 Vnitřní blatník — Řada 251

AR88.10-P-1400RT

Remove/install fender liner in rear fender

2.2.05

MODEL 251

Remove/install fender liner in rear fender

P88.10-2174-06

1 Nuts

2 Bolt

3 Fender liner in rear fender

4 Nuts

5 Expansion rivets

6 Expansion rivets

7 Bolt

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates below the hoist support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Lift/jack up vehicle

AR00.60-P-1000RT

2

Unscrew nuts (1)

3

Unscrew bolt (2).

4

Unscrew nuts (4)

5

Remove expansion rivets (5, 6)

6

Remove screw (7)

7

Loosen fender liner in rear fender (3) from rear fender with mounting wedge

Installation: Ensure that fender liner is seated correctly in rear fender (3)

Mounting wedge

*110589035900

8

Install in the reverse order

Remove/install fender liner in rear fender

Mounting wedge

110 589 03 59 00

Odkazované dokumenty