ar8810p1400rg

Remove/install fender liner in rear fender

Typ ar · téma 88.10 · verze 0102 · 2018-09-13

Platí pro: Model 190

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 88 Nástavbové díly, vnější víka › 88.10 Blatník — Řada 190

EinPAS 35 Karoserie/rám/montované díly › 35.37 Blatník › 35.37.40 Vnitřní blatník — Řada 190

AR88.10-P-1400RG

Remove/install fender liner in rear fender

13.09.2018

Model

190

Remove/install fender liner in rear fender

Shown on right side of vehicle

1

Fender liner

2

Screw

3

Expansion rivet

4

Nuts

5

Expansion rivet

P88.10-2312-06

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Remove/install

1

Remove rear left or right wheel and tire assembly

AR40.10-P-1100RQ

2

Unscrew bolt (2)

3

Remove expansion rivets (3, 5)

Clip remover

*452589016300

4

Unscrew nuts (4)

5

Detach and remove fender liner (1) on left or right from fender, longitudinal member panel and rear bumper

6

Install in the reverse order

Remove/install fender liner in rear fender

452 589 01 63 00

Clip remover

Odkazované dokumenty