P88.10-2154-09
Shown on left side of vehicle and front wheel removed
5 Bolts
6 Screw
7 Rear section, bottom engine compartment paneling
1 Front section, fender liner
2 Nut
3 Rear section, fender liner
4 Expansion rivets
| Remove/Install | ||
1 | Raise vehicle with lifting platform | ||
2.1 | Turn front wheels all the way to the left | When removing right rear fender liner section (3). | |
2.2 | Completely turn front wheels to right | When removing left rear fender liner section (3). | |
3 | Unscrew nuts (2) | ||
4 | Remove expansion rivets (4) | ||
5 | Unscrew bolts (5) | ||
6 | Unscrew bolt (6) and loosen rear bottom engine compartment paneling section (7) | ||
7 | Loosen rear fender liner section (3) from front fender with mounting wedge and remove | | |
Installation: Ensure that rear fender liner section (3) and rubber seals are seated correctly. | |||
8.1 | Remove front fender liner section (1) in front fender. | Only when removing front fender liner section (1) and rear fender liner section (3). | |
9 | Install in the reverse order |
Mounting wedge
110 589 03 59 00