AR88.00-P-2792MCC | Remove/install trim on center piece in front of windshield | 30.11.06 |
MODEL 451.3/ 4
P88.00-2338-09
1 Trim
2 Front CBS
3 Fender cover
4 Expansion clip
9 Hose
10 Bolts
11 Bolt
5 Edge guard
6 Bolt
7 Bolt
8 Spray nozzle
| Remove/install | ||
1 | Remove maintenance flap | ||
2 | Remove antenna rod | ||
3 | Open left and right door, press edge guard (5) to side in area of left and right fender covering (3) on both sides and remove expansion clip (4). | ||
4 | Slightly slide left and right fender covering (3) upward and remove. | ||
5 | Unscrew bolts (6, 7) | Installation: Check whether guide sleeve on bolt (7) is seated correctly. | |
6 | Unscrew bolt (11) in area of left front lamp unit and right front lamp unit. | ||
7 | Unscrew bolts (10) from paneling (1) | ||
8 | Carefully remove trim (1) toward front and covering (arrow B) simultaneously toward rear until hose (9) on spray nozzle (8) is accessible. | Installation: Observe installation position of hose (9) (arrow A) and covering (arrows B) in paneling (1). | |
9 | Remove hose (9) from spray nozzle (8) and lay trim (1) down to side. | ||
10 | Loosen spray nozzle (8) from trim (1) from rear with suitable pliers and remove. | When replacing trim (1). | |
11 | Install in the reverse order | ||
12 | Adjust spray nozzle (8) on windshield washer system. |