ar8610p0102a

Remove/install fire extinguishing system temperature sensor

Typ ar · téma 86.10 · verze 0101 · 2009-05-26

Platí pro: MODEL 463.236 /248 with CODE (979) Special protection version with CODE (ZS6) Special protection version FB6 with fire extinguishing system MODEL 463.236 /248 with CODE (979) Special protection version with CODE (ZS7) Special protection version FB7 with fire extinguishing system

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 86 Nouzová zařízení, výbava pro postižené osoby, sanitární vybavení, kuchyňka › 86.10 Nouzové přístroje — Řada 463 (modely 236, 248)

EinPAS 27 Systémy pasivní bezpečnosti/zádržné systémy › 27.21 Hasicí zařízení/systém hlášení požáru › 27.21.12 Snímač/spínač/kabelový svazek — Řada 463 (modely 236, 248)

AR86.10-P-0102A

Remove/install fire extinguishing system temperature sensor

30.4.09

MODEL 463.236 /248
with CODE (979) Special protection version
with CODE (ZS6) Special protection version FB6
with fire extinguishing system

MODEL 463.236 /248
with CODE (979) Special protection version
with CODE (ZS7) Special protection version FB7
with fire extinguishing system

Remove/install fire extinguishing system temperature sensor

P86.10-2096-11

B65/1 Rear fire extinguishing system temperature sensor

Remove/install fire extinguishing system temperature sensor

P86.10-2099-06

B65 Engine fire extinguishing system temperature sensor

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Lift/jack up vehicle

When lifting the vehicle do not damage fire extinguishing agent lines on fire extinguisher, otherwise this could lead to malfunction of the fire extinguishing system.

AR00.60-P-1000G

Only when removing rear fire extinguishing system temperature sensor (B65/1).

2.1

Disconnect bayonet connection for electrical connector on rear fire extinguishing system temperature sensor (B65/1)

When removing rear fire extinguishing system temperature sensor (B65/1).

2.2

Remove counternut and remove rear fire extinguishing system temperature sensor (B65/1)

When removing rear fire extinguishing system temperature sensor (B65/1).

3.1

Disconnect bayonet connection for electrical connector on engine fire extinguishing system temperature sensor (B65)

When removing engine fire extinguishing system temperature sensor (B65).

3.2

Remove counternut and remove engine fire extinguishing system temperature sensor (B65)

When removing engine fire extinguishing system temperature sensor (B65).

4

Install in the reverse order

5

Check rear fire extinguishing system temperature sensor (B65/1) or engine (B65)

AR86.10-P-0123A

Odkazované dokumenty