AR83.70-W-7000A | Removing and installing heater exhaust system | 6.6.96 |
MODEL 950, 952, 953, 954 with BODY 942.899 with CODE (H64) Hot water auxiliary heater "Eberspächer" D9W
W83.70-0016-12
1 Clamp
2 Screw
3 Washer
4 Nut
5 Screw with washer
6 Clamp mount
7 Screw with washer
8 Support frame
9 Muffler
10 Clamp
11 Connection fitting
12 Exhaust line
Danger! | Injury hazard from pinching and crushing when cab is tilted | When tilting ensure that no one is present in the tilting area of the cab. Always tilt cab to end position and secure with safety brace. | |
1 | Tilt cab | ||
2 | Open clamp mount (6) | ||
3 | Remove muffler (9) from support frame (8) | ||
4 | Open clamp (1) and pull exhaust line (12) off of muffler | Only for partial removal. | |
5 | Open clamp (10) on connection fitting | ||
6 | Pull exhaust line off of connection | Ensure that distance between exhaust line and fuel line is sufficient | |
7 | Remove exhaust line downward | ||
8 | Reinstall in opposite order |
Odkazované dokumenty
- as6080z000101a Nebezpečí úrazu v důsledku přivření a přiskřípnutí při sklápění kabiny řidiče