AR83.70-P-5302-01D | Bleeding coolant circuit after installing stationary heater | ||
Danger! | Heater booster, toxic combustion gases and severe burn hazard during and after operation | Do not start up or operate engines with heater booster in closed rooms. Allow heater to cool off after operation and wear protective gloves | |
Danger! | Danger of severe burns to skin and eyes from hot coolant spewing out. Coolant is toxic when swallowed | Open cooling system only when coolant temperature is below 90 °C. Open cover slowly and reduce pressure. Do not fill beverage containers with coolant. Wear protective gloves, protective clothing and protective goggles. |
1 Add coolant caught while removing heater to coolant expansion reservoir.
2 Close cap on expansion reservoir.
3 Set vehicle heater to "max".
4 Start vehicle engine and allow to warm up to operating temperature (approx. 80°C).
Check heater and coolant lines for leakage while engine is warming up.
5 Shut off vehicle engine after reaching operating temperature.
6 Check coolant level in expansion reservoir and add coolant if necessary.
Odkazované dokumenty
- as2000z000101a Nebezpečí poranění kůže a očí opařením vystřikující, horkou chladicí kapalinou. Nebezpečí otravy při požití chladicí kapaliny
- as8370z000201a Nebezpečí exploze palivových výparů, nebezpečí otravy při vdechnutí spalovacích plynů a nebezpečí poranění v důsledku popálení během nebo po provozu topení