ar8370d5937a

Removing and installing auxiliary heater control module

Typ ar · téma 83.70 · verze 0103 · 1998-07-31

Platí pro: MODEL 902.32# /42#, 903.32# /42#, 904.32# /42# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater Heater designation D1L-C MODEL 903.02# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater Heater designation B1L-C

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 83 Klimatizace › 83.70 Nezávislé topení, přídavné topení, přihřívač — Řada 902 (modely 32*, 42*) · Řada 903 (modely 02*, 32*, 42*) · Řada 904 (modely 32*, 42*)

EinPAS 39 Topení/větrání/chlazení › 39.25 Nezávislé topení/přídavné topení › 39.25.11 Řídicí jednotka/relé — Řada 902 (modely 32*, 42*) · Řada 903 (modely 02*, 32*, 42*) · Řada 904 (modely 32*, 42*)

AR83.70-D-5937A

Removing and installing auxiliary heater control module

4.11.96

MODEL 902.32# /42#, 903.32# /42#, 904.32# /42# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater
Heater designation D1L-C

MODEL 903.02# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater
Heater designation B1L-C

Removing and installing auxiliary heater control module

D83.70-0009-06

1 Control module
2 Electrical connector
3 Electrical connector
4 Retaining bracket

Removal, installation

Danger!

Fuel vapors present an explosion hazard. Combustion gases are toxic when inhaled. Heater can cause severe burns during and after operation

Do not start up or operate stationary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves.

AS83.70-Z-0002-01A

1

Exert upward tension on retaining bracket (4, arrow A)

2

Remove control module (1)

Installation: First hook in control module at bottom (arrow B), then catch at top in retaining bracket (arrow A).

3

Disconnect electrical connectors (2, 3)

4

Install in opposite order

Odkazované dokumenty