ar8370d5892c

Removing and installing timer

Typ ar · téma 83.70 · verze 0101 · 1998-06-27

Platí pro: MODEL 901.32#, 902.32# /42#, 903.32# /42#, 904.32# /42# ## as of 753731 as of 3.11.97 with CODE (H11) Hot air auxiliary heater Heater designation D1L-C compact MODEL 901.06#, 902.06# /07#, 903.06# /07#, 904.06# ## as of 753731 as of 3.11.97 with CODE (H11) Hot air auxiliary heater Heater designation B3L-C compact MODEL 901.36# /37# /46#, 902.36# /37# /46# /47#, 903.36# /37# /46# /47#, 904.36# /46# ## as of 753731 as of 3.11.97 with CODE (H11) Hot air auxiliary heater Heater designation D3L-C compact

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 83 Klimatizace › 83.70 Nezávislé topení, přídavné topení, přihřívač — Řada 901 (modely 06*, 32*, 36*, 37*, 46*) · Řada 902 (modely 06*, 07*, 32*, 36*, 37*, 42*, 46*, 47*) · Řada 903 (modely 06*, 07*, 32*, 36*, 37*, 42*, 46*, 47*) · Řada 904 (modely 06*, 32*, 36*, 42*, 46*)

EinPAS 39 Topení/větrání/chlazení › 39.25 Nezávislé topení/přídavné topení › 39.25.42 Ovládací jednotka/souprava — Řada 901 (modely 06*, 32*, 36*, 37*, 46*) · Řada 902 (modely 06*, 07*, 32*, 36*, 37*, 42*, 46*, 47*) · Řada 903 (modely 06*, 07*, 32*, 36*, 37*, 42*, 46*, 47*) · Řada 904 (modely 06*, 32*, 36*, 42*, 46*)

AR83.70-D-5892C

Removing and installing timer

8.9.97

MODEL 901.32#, 902.32# /42#, 903.32# /42#, 904.32# /42# ## as of 753731 as of 3.11.97 with CODE (H11) Hot air auxiliary heater
Heater designation D1L-C compact

MODEL 901.06#, 902.06# /07#, 903.06# /07#, 904.06# ## as of 753731 as of 3.11.97 with CODE (H11) Hot air auxiliary heater
Heater designation B3L-C compact

MODEL 901.36# /37# /46#, 902.36# /37# /46# /47#, 903.36# /37# /46# /47#, 904.36# /46# ## as of 753731 as of 3.11.97 with CODE (H11) Hot air auxiliary heater
Heater designation D3L-C compact

Removing and installing timer

D83.70-0171-05

1 Connector

2 Timer

Removal, installation

1

Press down retaining clips (arrows) and pull out timer (2).

Installation: Retaining clips must catch.

2

Disconnect connector (1)

3

Install in opposite order