ar8370d5687a

Remove and install temperature and overheating sensor

Typ ar · téma 83.70 · verze 0106 · 2003-03-04

Platí pro: MODELS 901.0 /3 /4 /6, 902.0 /3 /4 /6, 903.0 /3 /4 /6, 904.0 /3 /4 /6, 905.6 with CODE (H12) Hot water auxiliary heater MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (HZ9) Heater booster, diesel engine MODELS 901.6, 902.6, 903.6, 904.6 with CODE (HZ5) Warm air auxiliary heater 10 kW with timer MODEL 690.6 with CODE (H12) Hot water auxiliary heater MODELS 638.0 /1 /2 as of 13.10.97 with CODE (H12) Warm water auxiliary heater D5WS or B5WS

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 83 Klimatizace › 83.70 Nezávislé topení, přídavné topení, přihřívač — Řada 638 (modely 0**, 1**, 2**) · Řada 690 (modely 6**) · Řada 901 (modely 0**, 3**, 4**, 6**) · Řada 902 (modely 0**, 3**, 4**, 6**) · Řada 903 (modely 0**, 3**, 4**, 6**) · Řada 904 (modely 0**, 3**, 4**, 6**) · Řada 905 (modely 6**)

EinPAS 39 Topení/větrání/chlazení › 39.25 Nezávislé topení/přídavné topení › 39.25.12 Snímač/spínač/kabelový svazek — Řada 638 (modely 0**, 1**, 2**) · Řada 690 (modely 6**) · Řada 901 (modely 0**, 3**, 4**, 6**) · Řada 902 (modely 0**, 3**, 4**, 6**) · Řada 903 (modely 0**, 3**, 4**, 6**) · Řada 904 (modely 0**, 3**, 4**, 6**) · Řada 905 (modely 6**)

AR83.70-D-5687A

Remove and install temperature and overheating sensor

27.5.97

MODELS 901.0 /3 /4 /6, 902.0 /3 /4 /6, 903.0 /3 /4 /6, 904.0 /3 /4 /6, 905.6 with CODE (H12) Hot water auxiliary heater

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (HZ9) Heater booster, diesel engine

MODELS 901.6, 902.6, 903.6, 904.6 with CODE (HZ5) Warm air auxiliary heater 10 kW with timer

MODEL 690.6 with CODE (H12) Hot water auxiliary heater

MODELS 638.0 /1 /2 as of 13.10.97 with CODE (H12) Warm water auxiliary heater
D5WS or B5WS

Remove and install temperature and overheating sensor

D83.70-1276-06

1 Jacket housing cover

2 Cover for combustion air blower

3 Control module for auxiliary heater/heater booster

4 Plug housing

5 Cover

6 Combustion air blower

7 Jacket housing

8 In-car temperature sensor

9 Overheating sensor

10 Bracket

Remove/Install

Danger!

Risk of explosion from fuel vapors, risk of poisoning from inhaling combustion gases and risk of injury from burns during and after operation of heater unit

Do not operate stationary heater, auxiliary heater or engine with heater booster in closed areas or while filling fuel tank. Allow heater unit to cool down after operation and wear protective gloves.

AS83.70-Z-0002-01A

Danger!

Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel.

No fire, sparks, naked flames or smoking.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1.1

Remove heater

Models 901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4

AR83.70-D-5302F

Model 690.6, 901.6, 902.6, 903.6, 904.6, 905.6

AR83.70-D-5302I

Model 638

AR83.70-S-5335B

1.2

Remove heater booster

Models 902.6, 903.6, 904.6 with warm water auxiliary heater 10 kW with timer Code HZ5

AR83.70-D-7100A

2

Remove control module for auxiliary heater/heater booster (3)

AR83.70-D-5939A

3

Remove cover (5)

4

Remove cover (2) from combustion air blower (6)

5

Remove cover (1) from jacket housing (7)

6

Remove bracket (10)

7

Remove temperature (8) and overheating sensor

(8, 9) from jacket housing (7)

Installation: fit temperature and overheating sensor with new sealing rings.

8

Unclip temperature and overheating sensor lines on plug housing (4)

9

Install in the reverse order

10.1

Check auxiliary heater/heater booster for proper operation

Models 690.6, 901.0/3/4/6, 902.0/3/4/6, 903.0/3/4/6, 904.0/3/4/6, 905.6

10.2

Check function of stationary heater

Model 638

AR83.70-S-5302-02A

Odkazované dokumenty