P83.40-2296-06
Shown on model 230.4 without code (P99) Special model "AMG Black Series"
1 Cover
B32/2 AAC [KLA] 4-way sun sensor
| Remove/install | ||
1 | Switch off the ignition and remove the transmitter key from the EIS control unit | On vehicles with code (889) Keyless-Go, press KEYLESS-GO start/stop button repeatedly until ignition is switched off. Remove Keyless-Go chip card or transmitter key from vehicle and store beyond the reach of the transmitter (at least 2 m). | |
2 | Open engine hood and raise to vertical position | ||
3 | Take off cover (1) | ||
4 | Disconnect electrical connector from AAC [KLA] 4-way sun sensor (B32/2) | ||
5 | Unclip AAC [KLA] 4-way sun sensor (B32/2) and remove | ||
6 | Install in the reverse order |
Odkazované dokumenty
- ar8840p1000r Otevření kapoty motoru, uvedení do kolmé polohy, uzavření