ar8330p8085ak

Remove and install evaporator temperature sensor

Typ ar · téma 83.30 · verze 0102 · 2010-12-07

Platí pro: MODEL 169.0 /3, 245.2 (except 245.286) with CODE (580) Automatic air conditioning with CODE (581) Comfort automatic air conditioning

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 83 Klimatizace › 83.30 Klimatizace — Řada 169 (modely 0**, 3**) · Řada 245 (modely 207, 208, 231, 232, 233, 234)

EinPAS 39 Topení/větrání/chlazení › 39.15 Klimatizace › 39.15.12 Snímač/spínač/kabelový svazek — Řada 169 (modely 0**, 3**) · Řada 245 (modely 207, 208, 231, 232, 233, 234)

AR83.30-P-8085AK

Remove and install evaporator temperature sensor

1.12.10

MODEL 169.0 /3, 245.2 (except 245.286)
with CODE (580) Automatic air conditioning
with CODE (581) Comfort automatic air conditioning

Remove and install evaporator temperature sensor

Illustrated on model 169

1 Left footwell floor covering

2 Electrical connector

3 AC housing

B10/6 Evaporator temperature sensor

P83.30-3988-03

Remove/install

1

Remove cover below dashboard on left

AR68.10-P-1500AK

2

Pull left footwell floor covering (1) forward on the side behind the dashboard and the center console and fold over to the side

Installation: Make sure that seating of the left footwell floor covering (1) on the side behind the dashboard and the center console is correct.

3

Disconnect electrical connector (2) at evaporator temperature sensor (B10/6)

4

Pull evaporator temperature sensor (B10/6) out of air conditioner housing (3)

Installation: Make sure that seating of the evaporator temperature sensor (B10/6) in the air conditioner housing (3) is correct.

5

Install in the reverse order

Odkazované dokumenty