Shown on model 405.100 |
1 | Screw |
2 | Desiccant cartridge |
3 | Clamps |
4 | Refrigerant line |
5 | Refrigerant line |
G83.30-3121-11
Danger | Risk of explosion caused by welding or soldering work on closed air conditioning system. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with liquid refrigerant. | Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been drained. | |
| Remove/install | ||
1 | Tilt cab into repair position | ||
2 | Drain air conditioning system | ||
3 | Remove bolt (1) | ||
Topical note | Protect air conditioning circuit and components from moisture when carrying out repair work | ||
Model 405.100/101/102/103/120/121/122/123/200/201/220/221 | |||
Model 405.050 | |||
Bolt, refrigerant line to desiccant cartridge | |||
4 | Loosen clamps (3) | ||
5 | Pull out dessicant cartridge (2) downwards | Installation: Install a new desiccant cartridge (2). Check new desiccant cartridge (2) packaging for damage. | |
6 | Remove O-rings of refrigerant lines (4, 5) | Installation: Replace O-rings and coat with compressor oil. | |
7 | Install in the reverse order |
Odkazované dokumenty
- ah8330n000501a Ochrana okruhu a součástí klimatizace při opravárenských pracích před vlhkostí
- ar6080g0005b
- ar6080g0005b
- ar8330g1760b
- as8300z000101a Nebezpečí exploze při svářečských nebo pájecích pracích na uzavřené klimatizaci. Nebezpečí otravy při vdechnutí přehřátých výparů chladiva. Nebezpečí poranění při kontaktu očí a kůže s tekutým chladivem