ar8330d6540a

Install/remove condenser

Typ ar · téma 83.30 · verze 0112 · 2010-07-13

Platí pro: MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (H06) Air conditioning

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 83 Klimatizace › 83.30 Klimatizace — Řada 901 (modely 0**, 3**, 4**) · Řada 902 (modely 0**, 3**, 4**) · Řada 903 (modely 0**, 3**, 4**) · Řada 904 (modely 0**, 3**, 4**)

EinPAS 39 Topení/větrání/chlazení › 39.15 Klimatizace › 39.15.41 Kondenzátor/vysoušeč/plynový chladič — Řada 901 (modely 0**, 3**, 4**) · Řada 902 (modely 0**, 3**, 4**) · Řada 903 (modely 0**, 3**, 4**) · Řada 904 (modely 0**, 3**, 4**)

AR83.30-D-6540A

Install/remove condenser

12.7.10

MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (H06) Air conditioning

Install/remove condenser

D83.30-0008-06

1 Capacitor

2 Refrigerant line, refrigerant compressor/condenser

3 Refrigerant line of condenser/fluid reservoir

4 Bolt

Remove/install

Danger!

Risk of explosion caused by welding or soldering work on closed air conditioning system. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with liquid refrigerant.

Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been discharged.

AS83.00-Z-0001-01A

1

Remove front end center section

AR88.30-D-2302A

2

Discharge air conditioning system

AR83.30-D-1780A

Protect air conditioning circuit and components from moisture when carrying out repair work

All models fitted with air conditioning

AH83.30-N-0005-01A

3

Unscrew the refrigerant line from the refrigerant compressor to the condenser (2).

*BA83.30-N-1001-02A

4

Unscrew the refrigerant line from the condenser to the fluid reservoir (3)

*BA83.30-N-1003-02A

5

Undo screws (4) and remove the condenser (1) from the radiator

Installation: Top up compressor oil

*BF83.30-N-1003-01A

6

Install in the reverse order

7

Remove fluid reservoir

After a new condenser is installed, the fluid reservoir must always be replaced.

AR83.30-D-6520A

8

Evacuating air conditioning system, leak test

AR83.30-D-1762A

9.1

Fill air conditioning system, replenish (gaseous)

AR83.30-D-1767A

9.2

Fill air conditioning system (liquid)

AR83.30-D-1777A

Refrigerant lines

Number

Designation

Models
901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4 except model 904 with code HK1

BA83.30-N-1001-02A

Refrigerant line of AC compressor/condenser on condenser

Nm

33 ( 4)

BA83.30-N-1003-02A

Refrigerant line of condenser/fluid reservoir to condenser

Nm

17 ( 3)

Air conditioning

Number

Designation

Model
901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4 with code H06

BF83.30-N-1003-01A

Compressor oil refill quantity when replacing condenser

cm3

20

Specifications for
Operating Fluids

Sheet

BB00.40-P-0362-00A

Odkazované dokumenty