P83.25-2045-09
Illustrated on Model 203.0
1 Tie strap
1a Line
4 Water collector
5 Bolt
6 Bolt
7 Gaskets
2 Bracket
2a Line
3 Bracket
3a Line
| Remove/Install | ||
Danger! | Risk of injury in the form of trapping or crushing, or even severing of limbs, if caught in windshield wiper mechanism | Always remove ignition key when working on windshield wiper mechanism. | |
1 | Remove wiper arm on both sides | ||
2 | Open engine hood and move to upright position | ||
3 | Remove cover from front SAM control module with fuse and relay module (N10/1) | ||
4 | Open tie strap (1) | ||
5 | Expose lead (1a) | ||
6 | Remove lead (2a) from bracket (2) and expose | ||
7 | Remove lead (3a) from bracket (3) and expose | ||
8.1 | Disconnect connector from multi-function sensor convenience automatic air conditioning (B31) | With CODE (581b) convenience automatic air conditioning | |
9 | Unscrew bolts (5). | ||
10 | Unscrew screws (6) | ||
11 | Pull water collector (4) off of windshield frame | Loosen water collector (4) from windshield frame with pulling hook in direction of arrow. | |
Pulling hook | |||
12 | Remove water collector (4) | Installation: ensure correct seating of gaskets (7). | |
13 | Install in the reverse order |
Pulling hooks
140 589 02 33 00
Odkazované dokumenty
- ar8230p6100p
- ar8340p6730p
- ar8840p1000p
- ar8840p1000p
- as8230z000101a Nebezpečí poranění přivřením nebo přiskřípnutím, v extrémním případě amputace končetin při zásazích do mechaniky stěračů