ar8325d1155a

Remove and install pulsed valve

Typ ar · téma 83.25 · verze 0105 · 2003-09-15

Platí pro: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic" MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (HH9) Automatic air conditioning "Tempmatic" MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 690.6 with CODE (HH9) Automatic air conditioning "Tempmatic"

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 83 Klimatizace › 83.25 Automatické topení — Řada 690 (modely 6**) · Řada 901 (modely 6**) · Řada 902 (modely 6**) · Řada 903 (modely 6**) · Řada 904 (modely 6**) · Řada 905 (modely 6**)

EinPAS 39 Topení/větrání/chlazení › 39.15 Klimatizace › 39.15.13 Potrubí/hadice/ventil — Řada 690 (modely 6**) · Řada 901 (modely 6**) · Řada 902 (modely 6**) · Řada 903 (modely 6**) · Řada 904 (modely 6**) · Řada 905 (modely 6**)

AR83.25-D-1155A

Remove and install pulsed valve

15.7.99

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic"

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (HH9) Automatic air conditioning "Tempmatic"

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6 with CODE (HH9) Automatic air conditioning "Tempmatic"

Remove and install pulsed valve

D83.25-1105-06

1 Cycle valve

2 Hose clamp

3 Coolant hose

4 Rubber mounts

5 Bolt

6 Bracket

7 Rubber mounts

Remove/install

1

Position suitable receptacle for coolant below vehicle

2

Loosen hose clamps (2) and disconnect hoses (3)

3

Unscrew screws (5) and remove bracket (6) together with pulsed valve (1)

4

Turn bracket (6) slightly to the right and remove from the rubber mounts (4)

5

Pull rubber mounts (4, 7) out

Installation: install new rubber mount.

6

Install in the reverse order