ar8230w6100c

Removing and installing wiper arm

Typ ar · téma 82.30 · verze 0101 · 1998-06-16

Platí pro: MODEL 957 with BODY 957.810

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 82 Elektrické zařízení, nástavba › 82.30 Stírače — Řada 957

EinPAS 36 Výhled › 36.30 Stíraní/ostřikování › 36.30.50 Stěrače čelního okna — Řada 957

AR82.30-W-6100C

Removing and installing wiper arm

6.2.98

MODEL 957 with BODY 957.810

Removing and installing wiper arm

W82.30-0007-01

1 Cap
2 Spray water hose
3 Nut
4 Washer

Removal, installation

Danger!

Injury hazard! Windshield wiper mechanism can pinch, crush or, in extreme cases, even sever extremities.

Always remove ignition key when working on windshield wiper mechanism.

AS82.30-Z-0001-01A

1

Remove ignition key

2

Open front flap

3

Disconnect spray water hose (2) from connection point behind front end cover and pull outward

4

Press off cap (1) with installation wedge

*110589035900

5

Unscrew nut (3) and remove wiper arm

Loosen wiper arm from serrated cone on wiper shaft by turning slightly back and forth.

6

Install in opposite order

7

Adjust wiper system

AR82.30-W-6400-01A

Removing and installing wiper arm

Installation wedge

110 589 03 59 00

Odkazované dokumenty