ar8230p6100gc

Removing and installing wiper arm

Typ ar · téma 82.30 · verze 0103 · 2001-05-07

Platí pro: MODEL 168

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 82 Elektrické zařízení, nástavba › 82.30 Stírače — Řada 168

EinPAS 36 Výhled › 36.30 Stíraní/ostřikování › 36.30.50 Stěrače čelního okna — Řada 168

AR82.30-P-6100GC

Removing and installing wiper arm

11.11.96

MODEL 168

Removing and installing wiper arm

P82.30-0374-07

1 Wiper arm

3 Nut

4 Washer

2 Cover

Removing, installing

Danger!

Injury Hazard! Wiper mechanism can pinch, crush or, in extreme cases even sever extremities.

Always remove ignition key when working on wiper mechanism.

AS82.30-Z-0001-01A

1

Withdraw ignition key

2

Open engine hood

3

Pry cover (2) off with suitable screwdriver

4

Unscrew nut (3), remove washer (4)

*BA82.30-P-1003-01D

5

Remove wiper arm (1)

Installation: Observe installation position of wiper arm, e.g. mark on windshield.

6

Install in the reverse order

7

Carry out operational check

Ensure that wiper arm does not hit against rubber window seal, if necessary change wiper arm position.

Wiper

Number

Designation

Model 168

BA82.30-P-1003-01D

Nut for wiper arm on wiper shaft

Nm

20

Odkazované dokumenty