Wiper arm test and adjustment values
Number | Designation | Model | Model | ||
BE82.30-P-1002-01G | Wiper arm angle of incidence in center position | Left-hand drive vehicle | ° | +1.0 to -1.0 | +1.0 to -1.0 |
Right-hand drive vehicle | ° | -1.0 to +1.0 | -1.0 to +1.0 | ||
Wiper arm test and adjustment values
Number | Designation | Model | Model | ||
BE82.30-P-1002-01G | Wiper arm angle of incidence in center position | Left-hand drive vehicle | ° | +1.0 to -1.0 | +1.0 to -1.0 |
Right-hand drive vehicle | ° | -1.0 to +1.0 | -1.0 to +1.0 | ||
Adjustment tool set
211 589 02 21 00
P82.30-2303-11
1 Insert adapter (C) into the guide (arrow) of the angle gauge (A) and fasten with knurled bolt to angle gauge (A).
Use adapter (C) and angle gauge (A) from the adjustment tool set.
P82.30-2445-11
Shown on model 210 with wiper system in center position
2 Clamp adapter with angle gauge (A) by tightening the side knurled bolt at the head of the wiper arm (1).
3 Lower wiper arm (1) until all three contact points on the base of the angle gauge (A) touch the windshield.
4 Read off angle of incidence for wiper arm (1) on dial of angle gauge (A), write it down, and compare it to the test and adjustment value.
5.1 Detach angle gauge (A) from wiper arm (1) and lock wiper arm (1) in raised condition.
Only when the wiper arm (1) angle of incidence is in the center position within the specified tolerance.