AR82.30-D-7710A | Glue rain sensor bracket to windshield | 15.3.10 |
MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM1) Clear heatable windshield with rain sensor
MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM2) Tinted heatable windshield with rain sensor
MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (FM2) Tinted heatable windshield with rain sensor
D82.30-0023-01
D82.30-0024-01
D82.30-0025-01
1 Nylon mesh woven textile
A Rain sensor bracket with collar (old version)
B Rain sensor bracket without collar (new version)
1 Nylon mesh woven textile
2 Rain sensor bracket
| Install | ||
1 | Cut through nylon mesh fabric (1) from repair set diagonally | ||
2 | Place rain sensor bracket (2) on nylon mesh fabric (1) | ||
3 | Cut the nylon mesh fabric (1) to the contours of the rain sensor bracket (2) | On the old version (A) of the rain sensor bracket cut back the nylon mesh fabric somewhat more on the inside, as the nylon mesh fabric must not lie on the collar (arrow). | |
4 | Glue on the rain sensor bracket (2) | In order to avoid assembly errors, be sure to observe the assembly notes in the leaflet from the bonding kit. For a trouble-free operation of the rain sensor make sure no adhesive gets onto the inner edge of the rain sensor bracket. |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1074-02A | Adhesive, inside rearview mirror to windshield | A 005 989 47 71 |