Remove/install overhead control panel control unit

AR82.20-P-1000P

Remove/install overhead control panel control unit

4.11.05

17.10.05

Disconnect ground line of battery, removed

Step 2

 

Remove/install

1.1

Transfer basic data from overhead control panel control unit (N70) to STAR DIAGNOSIS

When installing new overhead control panel control unit (N70).

 Installation: Transfer buffered basic data to new overhead control panel control unit (N70), and for code (414) Tilting/sliding roof, normalize the anti-pinch protection.



Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

STAR DIAGNOSIS diagnosis system

*WH58.30-Z-1048-13A

2

Remove transmitter key from electronic ignition switch control unit

3

Pry off lens (1) from overhead control panel control unit (N70)

 Risk of cracks and fracture to headliner and overhead control panel control unit (N70).

 Mounting wedge

*110589035900

4

Press overhead control panel control unit (N70) releases (2)

 Note direction of arrow

5

Remove overhead control panel control unit (N70)

 Installation: Excess pressure and tensile stress on the roof switch will damage the overhead control panel control unit (N70)

6

Disconnect connectors from overhead control panel control unit (N70)

7

Install in the reverse order

8.1

Normalize tilting/sliding roof

 For vehicles with code (414) Tilting/sliding roof

9

Read fault memory, erase if necessary



Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

STAR DIAGNOSIS diagnosis system

*WH58.30-Z-1048-13A

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00