ar8210s4905a

Removing and installing taillamp unit

Typ ar · téma 82.10 · verze 0104 · 1999-01-21

Platí pro: MODEL 638.0 /1 /2

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 82 Elektrické zařízení, nástavba › 82.10 Vnější osvětlení — Řada 638 (modely 0**, 1**, 2**)

EinPAS 30 Osvětlovací soustava › 30.15 Vnější osvětlení › 30.15.41 Zadní světlo — Řada 638 (modely 0**, 1**, 2**)

AR82.10-S-4905A

Removing and installing taillamp unit

22.5.95

MODEL 638.0 /1 /2

Removing and installing taillamp unit

S82.10-1015-06

1 Bulb carrier

2 Stop lamp

3 Side light

4 Turn signal lamp

5 Reverse lamp

6 Fog taillamp

7 Screws

E67 Left rear lamp

E68 Right rear lamp

Removal, installation

1

Switch off driving and parking lights

2

Unscrew screws (7)

3

Remove taillamps (E67, E68)

4

Disconnect connector

5

Remove bulb carrier (1)

6

Remove bulbs

Injury hazard from burning, if bulb has just been switched off!

Do not touch glass section of bulb with bare fingers.

Installation: Ensure that bulb is properly seated.

7

Install in opposite order