ar7755t1000ba

Insert cover for roof or emergency escape hatch

Typ ar · téma 77.55 · verze 0100 · 2006-03-16

Platí pro: MODEL NMB613.358 /388 with CODE (H45) Roof hatch, remote controlled (electrical)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 77 Posuvné střešní okno, skládací střecha, nástavce › 77.55 Střešní poklopy, nouzové výstupy — Řada 613 (modely 358, 388)

EinPAS 38 Střešní systém › 38.30 Střešní poklop/nouzový výstup/střešní větrací víko › 38.30.30 Střešní poklop/nouzový výstup/střešní větrací víko — Řada 613 (modely 358, 388)

AR77.55-T-1000BA

Insert cover for roof or emergency escape hatch

10.3.06

MODEL NMB613.358 /388 with CODE (H45) Roof hatch, remote controlled (electrical)

Insert cover for roof or emergency escape hatch
Insert cover for roof or emergency escape hatch

T77.55-0049-01

1 Eye block

2 Rocker arm

3 Lever mechanism

4 Pin

5 Retaining ball

T77.55-0050-01

Install

1

Arrest outer emergency handle at outer side of cover.

2

Move lever mechanism (3) for roof or emergency escape at front and rear to open position.

Ensure that bolts (4) are pulled out of eye blocks (1) up to the stop.

3

Ensure that check strap of cover is seated correctly on roof frame

4

Check screw connection for check strap on cover, retighten if necessary.

5

Lay cover down on rocker arm (2)

Lay cover down so that rocker arms (2) are positioned in eye blocks (1).

6

Slide bolts (4) to eye blocks (1) up to stop.

Move rocker arms (2) slightly to facilitate sliding in the bolts (4).Install bolts (4) in dry state to prevent premature wear.

Check

7

Ensure that cover is correctly locked.

The position of the emergency actuation handles does not indicate whether or not the bolts (4) are arrested correctly.Ensure that bolts (4) are inserted correctly into rocker arms (2).The retaining balls (5) should be visible on all bolts (4).