ar7737p3501w

Check/correct fluid level of hydraulic unit

Typ ar · téma 77.37 · verze 0101 · 2011-03-25

Platí pro: MODEL 172.4

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 77 Posuvné střešní okno, skládací střecha, nástavce › 77.37 Vario-střecha, hydraulická část — Řada 172 (modely 4**)

EinPAS 38 Střešní systém › 38.20 Skládací střecha/střecha kupé/střecha vario › 38.20.1 Základní informace — Řada 172 (modely 4**)

AR77.37-P-3501W

Check/correct fluid level of hydraulic unit

16.3.11

MODEL 172.4

Check/correct fluid level of hydraulic unit

P77.37-2252-01

1 Crossmember cover

Check/correct fluid level of hydraulic unit

P77.37-2251-06

2 Insulation mat

3 Rubber bushing

4 Filler plug

A7/5 Vario roof control hydraulic unit

A Fluid level mark

Checking

Danger!

Risk of injury to skin or eyes caused by hydraulic fluid spraying out under high pressure. Risk of poisoning caused by swallowing hydraulic fluid

Depressurize the hydraulic system completely before starting any work on the system. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A

The vario roof must be opened and closed completely at least 3 times to bleed the hydraulic system, if the oil level of the vario roof is checked when working on the hydraulic system.

1

Open Vario roof

2

Remove crossmember cover (1) from vario roof crossmember until vario roof control hydraulic unit (A7/5) is accessible

AR77.37-P-3500W

3

Fold up insulating mat (2) and secure against folding down

4

Read oil level off of oil level marking (A) on oil reservoir of vario roof control hydraulic unit (A7/5)

The fluid level must be within the marking (A).

Correct

5

Unhook vario roof control hydraulic unit (A7/5) from rubber mounts (3) and turn until filling screw (4) can be unscrewed so that hydraulic oil cannot flow out of the filler opening on the oil reservoir

6

Screw in filler screw (4)

7

Fill fluid reservoir of vario roof actuation hydraulic unit (A7/5) with filling syringe until fluid level is within marking (A)

Lay rag below vario roof control hydraulic unit (A7/5), to prevent soiling of adjacent components.

The filler opening must be closed for correctly checking the fluid level and the vario roof control hydraulic unit (A7/5) must be in the installation position.

Hydraulic fluids (Specification 343.0)

Sheet 343.0

BB00.40-P-0343-00A

Filler syringe

*230589016300

8

Tighten filler screw (4)

*BA77.37-P-1005-01A

9

Fasten vario roof control hydraulic unit (A7/5) on rubber mounts (3)

10

Fold down insulating mat (2) and hook into vario roof crossmember

11

Install crossmember cover (1)

AR77.37-P-3500W

12

Close Vario roof

Soft top hydraulic components

Number

Designation

Model
172

BA77.37-P-1005-01A

Filler screw to hydraulic unit

Nm

1

Check/correct fluid level of hydraulic unit

Filler syringe

230 589 01 63 00

Odkazované dokumenty