AR77.21-P-0050T | Remove/install panoramic roof water repellent* | 12.12.02 |
MODEL 211.0 with CODE (413) Panoramic sliding roof
MODEL 211.0
with CODE (413) Panoramic sliding roof
with CODE (419) Solar module for panoramic roof*
P88.85-2077-09
Shown on left side of vehicle
1 Panoramic roof water repellent*
4 Ornamental frame
2 Clamps
3 Nut
| Remove | ||
1 | Remove water repellent. | ||
2 | Unclip panoramic roof water repellent (1) from rear to front with mounting wedge directly at clamps (2) and pull out below ornamental frame (4) on windshield* | Mounting wedge | |
| Install | ||
3 | Check clamps (2) for condition | Replace clamps (2) if necessary. | |
4 | Guide panoramic roof water repellent (1) under ornamental frame (4) on windshield and lay loose on clamps (2)* | ||
5 | Align panoramic roof water repellent (1) and latch in clamps (2) * | Observe gap to glass roof, if necessary, remove panoramic roof water repellent (1), loosen nuts (3) and realign clamps (2).* | |
6 | Remove water repellent |
Mounting wedge
110 589 03 59 00