ar7720p1100e

Adjusting tilting/sliding roof panel

Typ ar · téma 77.20 · verze 0105 · 2009-11-06

Platí pro: MODEL 202 with CODE (412b) Electrically operated tilting/sliding roof with CODE (414a) Electrically operated glass tilting/sliding roof

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 77 Posuvné střešní okno, skládací střecha, nástavce › 77.20 Elektrické posuvné střešní okno — Řada 202

EinPAS 38 Střešní systém › 38.15 Posuvné střešní okno / panoramatické střešní okno › 38.15.33 Vnější plechy / kryt posuvného střešního okna — Řada 202

AR77.20-P-1100E

Adjusting tilting/sliding roof panel

23.6.93

MODEL 202
with CODE (412b) Electrically operated tilting/sliding roof
with CODE (414a) Electrically operated glass tilting/sliding roof

Adjusting tilting/sliding roof panel

P77.20-0026-06

8 Holder

10 Screw

A (x) Measuring positions

Removal, installation

1

Remove cover on tilting/sliding roof

On steel tilting/sliding roof (code 412b)

AR77.20-P-0500E

On the glass tilting/sliding roof (code 414a) it is only necessary to unhook the rubber bellows on the tilting/sliding roof panel in order to reach the screw (10).

Adjustment

2

Loosen screw (10)

3

Adjust tilting/sliding roof panel

It is necessary to check the adjustment after closing from the sliding position.

*BE77.20-P-1002-01A

4

Reinstall in opposite order

Test and adjustment values for sliding roof

Number

Designation

Model 202

BE77.20-P-1002-01A

Height adjustment

Measuring position "A" (X)

mm

140

front: lower than roof panel

mm

0...1

rear: higher than roof panel

mm

0...1

Odkazované dokumenty