AR72.20-P-6615C | Remove/install rear-end door trim | 16.6.10 |
MODEL 461.229 /238 /239 /321 /322 /326 /328 /332 /333 /334 /335 /336 /337 /338 /340 /342 /344 /403 /404 /450 /452 with CODE (W51) 2-wing rear-end door with window
MODEL 461.332 /333 /334
except CODE (ZS4) Special protection version FB4
except CODE (ZS6) Special protection version FB6
except CODE (ZS7) Special protection version FB7
P72.20-2072-01
Shown on left door trim
1 Lock
2 Screw
3 Cover
4 Door trim
| Remove/install | ||
1 | Remove locking mechanism (1) | Only on left rear-end door. | |
Installation: Secure bolt (2) with quick-action adhesive. | |||
Quick-action adhesive | |||
2 | Take off cover (3) | Only on left rear-end door. | |
Removal: Push back cover (3). | |||
3 | Pry off door trim (4) at inner door panel with a door trim release lever. | Removal: Use clean shop towel as a base for the door trim release lever. | |
Installation: Check clips; replace if necessary. | |||
4 | Remove door trim (4) | ||
5 | Install in the reverse order |
Auxiliary repair materials
Number | Designation | Order number |
BR00.45-Z-1008-02A | Quick-acting adhesive, Loctite 270 | A 002 989 93 71 |