P72.20-2400-09
1 Upper paneling
2 Lower paneling
3 Center paneling
4 Retaining clips
5 Retaining clips
6 Expanding clip
7 Bolt
S62/35 Close rear-end door button (with code (890) Automatic rear-end door)
S150 Loading floor switch (with code (943) Extendable automatic main loading floor)
8 Handle flap frame
9 Rear-end door
E18/1 Luggage compartment lamp
S62/21 Trunk lid Keyless button (with code (889) Keyless go)
Modification notes
| Remove/Install | ||
1 | Switch off luggage compartment lamp (E18/1) by locking the rear-end door lock with suitable screwdriver | Installation: Actuate opening handle on inside of rear-end door (9) to unlock the rear-end door lock. | |
2 | Unclip upper paneling (1) on retaining clips (4, 5) from rear-end door (9) with mounting wedge and remove | Do not remove upper paneling (1) when only lower paneling (2) must be removed | |
| |||
Installation: Replace defective retaining clips (4, 5) Ensure that upper paneling (1) is seated correctly. | |||
3 | Remove expanding clips (6) | ||
4.1 | Remove bottom paneling (2) until electrical connector on rear-end door closing button (S62/35) is accessible and disconnect electrical connector on rear-end door closing button (S62/35) | On vehicles with code (890) Automatic rear-end door | |
5.1 | Remove bottom paneling (2) until electrical connector on loading floor switch (S150) is accessible and disconnect electrical connector on loading floor switch (S150) | On vehicles with code (943) Automatically extending main loading floor | |
6.1 | Remove bottom paneling (2) until electrical connector on trunk lid Keyless go button (S62/21) is accessible and disconnect electrical connector on trunk lid Keyless go button (S62/21) | On vehicles with code (889) Keyless go | |
7 | Remove bottom paneling (2) from rear-end door (9) | ||
8 | Remove bolt (7) | ||
9 | Slide handle flap frame (8) in direction of arrow (arrow A) and remove | ||
10 | Lift center paneling (3) in area of inner handle flap with mounting wedge (arrowB) | | |
11 | Slide center paneling (3) in direction of arrow (arrow A) and lower until electrical connector on luggage compartment lamp (E18/1) is accessible | ||
12 | Disconnect electrical connector from luggage compartment lamp (E18/1) and remove center paneling (3) | ||
13 | Install in the reverse order |
Mounting wedge
110 589 03 59 00