P72.20-2470-08
1 Rear-end door paneling
2 Rear-end door lock
3 Rear-end door lock paneling
4 Clip
9 Clip
E40 Trunk lid ambient lamp
5 Electrical connector
6 Right upper paneling
7 Left upper paneling
8 Maintenance flap
P72.20-2471-08
1 Rear-end door paneling
11 Clip
10 Expansion clip
| Remove | ||
1 | Open rear-end door | ||
2 | Switch off trunk lid ambient lamp (E40) by locking rear-end door lock (2) with suitable screwdriver | ||
3 | Slide trunk lid ambient lamp (E40) downward, remove from rear-end door lock paneling (3), disconnect electrical connector and remove trunk lid ambient lamp (E40) | ||
4 | Unclip rear-end door lock paneling (3) and remove | Start loosening clips (4) on trunk lid ambient lamp (E40). | |
| |||
5 | Disconnect electrical connector (5) and remove wiring harness to rear-end door lock (2) from rear-end door paneling (1) | ||
6 | Remove maintenance flap (8) | ||
7 | Unclip right upper paneling (6) and remove | First loosen upper right paneling (6) on transition to upper left paneling (7) | |
| |||
8 | Unclip upper left paneling (7) and remove | | |
9 | Check clips (9) on rear of right upper paneling (6) and check left upper paneling (7) for damage, replace if necessary. | ||
10 | Remove expansion clips (10) | ||
11 | Unclip rear-end door paneling (1) | | |
12 | Pull rear-end door paneling (1) toward rear downward and remove | ||
| Install | ||
13 | Unclip remaining clips (11) from rear-end door with suitable tool and check for damage, replace if necessary | ||
14 | Guide rear-end door paneling (1) over rear-end door lock (2) and clip in clips (11) | ||
15 | Install expansion clips (10) | ||
16 | Clip in left upper paneling (7) | ||
17 | Clip in right upper paneling (6) | ||
18 | Fasten wiring harness to rear-end door lock (2) on rear-end door paneling (1) and connect electrical connector (5) | ||
19 | Remove maintenance flap (8) from rear-end door wiper motor | ||
20 | Install rear-end door lock paneling (3) | Insert clips (4) on rear-end door lock paneling (3) into mounts on rear-end door paneling (1). | |
21 | Connect electrical connector on trunk lid ambient lamp (E40) and arrest trunk lid ambient lamp (E40) in rear-end door lock paneling (3) | ||
22 | Unlock rear-end door lock (2) | ||
23 | Close rear-end door |
Mounting wedge
110 589 03 59 00