P72.20-2419-08
Shown on model 169.0
1 Rear-end door paneling
2 Rear-end door lock
3 Rear-end door lock paneling
4 Electrical connector
E40 Trunk lid ambient lamp
(with code (954) Avantgarde or with code (955) Elegance)
5 Maintenance flap
6 Expansion clip
7 Right upper paneling
8 Left upper paneling
P72.20-2488-11
7 Right upper paneling
8 Left upper paneling
9 Clip
Modification notes
| Remove | ||
1 | Open rear-end door | ||
2.1 | Switch off trunk lid ambient lamp (E40) by locking rear-end door lock (2) with suitable screwdriver | On vehicles with Code (954) Avantgarde or with code (955) Elegance | |
3.1 | Slide trunk lid ambient lamp (E40) downward, remove from rear-end door lock paneling (3), disconnect electrical connector and remove trunk lid ambient lamp (E40). | On vehicles with code (954) Avantgarde or with code (955) Elegance | |
4 | Unclip rear-end door lock paneling (3) with suitable screwdriver first at left and right (arrows), then toward center and remove | Carefully unclip rear-end door lock paneling (3) to prevent damaging the rear-end door paneling (1). | |
5 | Disconnect electrical connector (4) and remove wiring harness to rear-end door lock (2) from rear-end door paneling (1) | ||
6 | Remove maintenance flap (5) | ||
7 | Unclip right upper paneling (7) and remove | First loosen right upper paneling (7) on transition to left upper paneling (8) | |
| |||
8 | Unclip left upper paneling (8) and remove | | |
9 | Unclip rear-end door paneling (1) | | |
10 | Detach rear-end door paneling (1) in area of center high-mounted stop lamp. | ||
11 | Pull rear-end door paneling (1) toward rear downward and remove | ||
12 | Check clips (9) on rear of right upper paneling (7) and check left upper paneling (8) for damage, replace if necessary. | ||
| Install | ||
13 | Unclip remaining expansion clips (6) from rear-end door with suitable tool and check for damage, replace if necessary | ||
14 | Guide rear-end door paneling (1) over rear-end door lock (2) and clip in clips (6) | Ensure that rear-end door paneling (1) is seated correctly in center high-mounted stop lamp. | |
15 | Clip in left upper paneling (8) | Ensure that left upper paneling (8) is seated properly on rear-end door. | |
16 | Insert right upper paneling (7) into left upper paneling (8) and clip into rear-end door | Ensure that right upper paneling (7) is seated correctly on left upper paneling (8) and rear-end door | |
17 | Fasten wiring harness to rear-end door lock (2) on rear-end door paneling (1) and connect electrical connector (4) | ||
18 | Install maintenance flap (5) | Ensure that maintenance flap (5) is seated correctly in rear-end door paneling (1). | |
19 | Install rear-end door lock paneling (3) | Insert clips on rear-end door lock paneling (3) into mounts on rear-end door paneling (1). | |
20.1 | Connect electrical connector on trunk lid ambient lamp (E40) and arrest trunk lid ambient lamp (E40) in rear-end door lock paneling (3) | On vehicles with code (954) Avantgarde or with code (955) Elegance | |
21.1 | Unlock rear-end door lock (2) | On vehicles with code (954) Avantgarde or with code (955) Elegance | |
22 | Close rear-end door |
Mounting wedge
110 589 03 59 00